The figure "Dani" is in scale about 1:10. It was created by myself and then brought to printable with
another editing program. The figure is super detailed and relatively easy to print.
 

Delivery:

- Figure "DANI" as a model in STL-binary format
 

Tips for 3D printing:

The figure "Dani" is very easy to print. No special settings need to be made on the slicing program to
print the model. You should only pay special attention to the settings of the support structure.
The figure must be well supported during the print. Since "Dani" does not have a base plate, you also
have to pay attention to good builtplate adhesion (brim or raft). The print works perfectly with the
standard 0.4mm extrudernozzle.
The layer thickness should not exceed 0.1mm.